The Firing Line Forums - View Single Post

superspirit · June 26, 2013, 04:03 PM

I use the Lee case length gauge and cutter system, I mount the cutter in a 1/2 drill and trim away, I've also mounted it in a drill press and done bigger lots of brass that way. cheapest and easiest way I've found.

June 26, 2013, 04:03 PM	#9
superspirit Senior Member Join Date: April 8, 2013 Posts: 211	I use the Lee case length gauge and cutter system, I mount the cutter in a 1/2 drill and trim away, I've also mounted it in a drill press and done bigger lots of brass that way. cheapest and easiest way I've found.