The Firing Line Forums - View Single Post

Metal god · November 5, 2012, 02:35 AM

Well I just got done sanding the heck out of the inside of the barrel chanel of my stock When I was done I had given the barrel an extra 1/6 to 3/32 of space all the way around . I think this will work . It definitely has a bigger gap between the barrel and the stock and is is still ridgid when handling the rifle . I used 1/2" flexable ruber conduit as a sanding block . Started with 80gr to 150gr to 220gr to 320gr . Sorry I forgot to take a before picture. Trust me the stock was almost touching the barrel in some areas .

November 5, 2012, 02:35 AM	#59
Metal god Senior Member Join Date: April 10, 2012 Location: San Diego CA Posts: 6,875	Well I just got done sanding the heck out of the inside of the barrel chanel of my stock When I was done I had given the barrel an extra 1/6 to 3/32 of space all the way around . I think this will work . It definitely has a bigger gap between the barrel and the stock and is is still ridgid when handling the rifle . I used 1/2" flexable ruber conduit as a sanding block . Started with 80gr to 150gr to 220gr to 320gr . Sorry I forgot to take a before picture. Trust me the stock was almost touching the barrel in some areas . __________________ If Jesus had a gun , he'd probably still be alive ! I almost always write my posts regardless of content in a jovial manor and intent . If that's not how you took it , please try again .