Quote:
Originally Posted by CheckmateMD
...The gun will not dry fire and pass the safety function tests. The bolt action works and locks in place, but will not dry fire with the safety off...
|
Sounds like the trigger group isn't put back together right...
With the bolt forward, knock out the two trigger group pins, it should come out looking like this:
To release the hammer place your hand firmly over the hammer and pull the trigger, as you lift your hand the hammer should come forward:
With the hammer all the way forward you can turn the trigger group over to get to the hammer spring and cocking indicator:
Re-assemble in the reverse order....
After you have it back together, pull the bolt back until it locks, then press the bolt release button. When the bolt is released forward, the "cocking indicator" should be visible in the trigger guard and you can "feel" the nub....