|
gb_in_ga,
I haven't picked up the Lee FCD yet. Still seating and crimping in the same step (Lee Pro 1000). I'm seating to the same OAL as you (.970) with a diameter of .370. While working up the load I started at 2.3gr, to 2.6gr, to 2.9gr, and finally 3.1gr. All cycled the Bersa just fine with no FTF's, FTE's, or stove pipes. 2.9gr was pretty accurate with 3.1gr being more so and still no pressure signs. I settled in with the 2.9gr, happy with the accuracy (at the time) and wasn't beating up the Bersa. Had it at the range Saturday and wasn't pleased with the accuracy. Seems something may have changed. Getting ready to go back through all of my data, including double checking the dimensions of my previously loaded cartridges, to make sure nothing changed. I know the powder charge is spot on as I'm very careful to check the case prior to bullet placement/seating. Thanks again for the info. I'll load up some 3.1gr's and a few at 3.2gr's and check for pressure to be sure.
Richard
|