View Single Post
Old December 24, 2012, 10:43 PM   #15
CharlieDeltaJuliet
Senior Member
 
Join Date: July 25, 2012
Posts: 755
Yep, listen to Flak. It took quite a while to work up my AMAX loads and seat depth. While my Hogue is as stiff as a board now(after epoxy), most simple would not want to take the time. Another thing, triggers.... I recommend getting a good aftermarket trigger. I set my factory X-Mark to just above 1.3lbs, but it requires some polishing. I had the trigger completely apart polishing the sear. This was a couple hours to get it tuned. To be honest, it worked great but still did I not offer the feel of a Timney or a Jewel..etc.. Just food for thought.
__________________
" The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect
themselves against tyranny in Government.
..." - Thomas Jefferson
CharlieDeltaJuliet is offline  
 
Page generated in 0.02737 seconds with 8 queries