The Firing Line Forums - View Single Post

Tdownes · November 29, 2009, 06:49 PM

I have an 1890 winchester pump, 22 short. At times the spent shell stays on top of the carrier turned at a slight angle and is jammed/held by the ejector. Also at times when moving the slide forward the round enters the chamber half way then the action stops. Sometimes I can manipulate the action to the point the round is chambered. Other times the ejector catches the rim of the round; when this happens it is impossiple to chamber the round. It's almost like the timing is off. Any ideas?

November 29, 2009, 06:49 PM	#5
Tdownes Junior Member Join Date: November 29, 2009 Posts: 1	feed and ejector problems 1890 winchester I have an 1890 winchester pump, 22 short. At times the spent shell stays on top of the carrier turned at a slight angle and is jammed/held by the ejector. Also at times when moving the slide forward the round enters the chamber half way then the action stops. Sometimes I can manipulate the action to the point the round is chambered. Other times the ejector catches the rim of the round; when this happens it is impossiple to chamber the round. It's almost like the timing is off. Any ideas?