The Firing Line Forums - View Single Post

Hawg · March 19, 2009, 01:24 PM

It'll work and won't come loose if both screws go into the tang. I had a set up like that on a Investarms Hawken I used the rear tang screw and drilled and tapped the tang for the front screw. It's good for target work but it sucks for hunting.

March 19, 2009, 01:24 PM	#2
Hawg Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 16,188	It'll work and won't come loose if both screws go into the tang. I had a set up like that on a Investarms Hawken I used the rear tang screw and drilled and tapped the tang for the front screw. It's good for target work but it sucks for hunting.