10/22 disassembly:
1- Remove the magazine and check that the action in unloaded.
2- Remove front band (if so equipped).
3- Loosen the action screw (in front of the magazine well).
4- Center the safety button, lift the barreled action out of the stock.
5- Push the buffer pin out of the receiver.
6- Push the trigger group pins out of the reciever.
7- Pull the bolt to the rear until it lifts out of the action. It is retained by two rails that have a cutout at the rear of the action. DO NOT launch the bolt handle/recoil spring assembly across the room!
Assembly is in reverse order.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
|