View Single Post
Old May 13, 2011, 10:21 PM   #2
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
You have the Model 70A, a less expensive version of the Model 70 made to compete with Remington's 700 ADL. I am not absolutely sure, but I don't think you need a new stock. I believe all you will need is the floorplate, hinge plate and trigger guard; AFAIK the magazine box, follower and spring are the same. For the parts, see www.gunpartscorp.com for the floorplate (Winchester calls it the magazine cover). You will need not only the floorplate and the magazine cover hinge plate, but also the trigger guard with the plunger to retain the magazine cover. Now for the interesting part - the cover will run around $70, the hinge plate around $20 and the trigger guard maybe over $100. You will also have to inlet the stock, something to be done very carefully. With the prices of the parts involved, and the labor if you can't do the work yourself, you might reconsider the project or think about trading for a rifle that already has a floorplate.

Jim
James K is offline  
 
Page generated in 0.02420 seconds with 8 queries