The Firing Line Forums - View Single Post - good low/mid range loads for plated bullets

ROSW · September 1, 2013, 05:31 PM

My understanding is a taper crimp is not for a bullet with a crimp groove. A taper crimp's purpose is to remove the case flare typically needed for plated bullets. Only bullets with a groove require a roll crimp.

September 1, 2013, 05:31 PM	#17
ROSW Junior Member Join Date: July 15, 2013 Posts: 8	My understanding is a taper crimp is not for a bullet with a crimp groove. A taper crimp's purpose is to remove the case flare typically needed for plated bullets. Only bullets with a groove require a roll crimp.