The Firing Line Forums - View Single Post - Need suggestions for a massive media separator

big al hunter · May 24, 2013, 06:45 PM

You might try building a screening table. I would go with a 2x12 Douglas fir frame with 1/4 inch wire fabric bottom. About 4 ft by 4 ft should hold more than a concrete mixer.( that calcs to over 100 gallons.) Then hang it in a rack so you can swing it back and forth. Put another box with a plywood bottom under it so you can reclaim the media.

May 24, 2013, 06:45 PM	#2
big al hunter Senior Member Join Date: March 12, 2011 Location: Washington state Posts: 1,558	You might try building a screening table. I would go with a 2x12 Douglas fir frame with 1/4 inch wire fabric bottom. About 4 ft by 4 ft should hold more than a concrete mixer.( that calcs to over 100 gallons.) Then hang it in a rack so you can swing it back and forth. Put another box with a plywood bottom under it so you can reclaim the media. __________________ You can't fix stupid....however ignorance can be cured through education!