|
The proper components are available without a great deal of trouble. Between Precision Reloading (http://www.precisionreloading.com) and Ballistic Products (http://www.ballisticproducts.com) you should be able to come up with suitable nitro cards, wads, and overshot cards. rangerco is correct in saying that you need 11 gauge components- if you happen to find some of the old Alcan wads, the box may read either 11 gauge or 12 gauge for brass shells. Waterglass or a little bit of silicone calk works well to seal the top of the shell- above the overshot card. Personally, I'd avoid the use of 10 gauge components if you don't have pressure testing equipment: even if you do have a strain gauge based setup, the correct offset for these cases will be problematic. If loading data is a problem, I can point you in the right direction. Just repost. Good luck, Bob
|