Thread: COAL
View Single Post
Old March 29, 2013, 08:20 PM   #4
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
Quote:
Shouldn't the modified case be the same as a full length resized case?
That depends on how you size your cases. Properly sized cases should be .001-.002 shorter than your chamber.

The modified case is sized by Hornady to SAAMI minimum length.

My sized cases are all slightly longer from base to shoulder than the modified cases.

Take a permanent marker and color the bullet on one of your rounds. Chamber it carefully and extract it. Check if the rifling has scratched off the marker. Even if it does, if you start at minimum and work up, you'll be safe but pressures will be higher than if the bullet wasn't seated in the rifling.
__________________
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
 
Page generated in 0.03724 seconds with 8 queries