The Firing Line Forums - View Single Post - I'm considering either a Dillon 550b, RCBS Turret or Pro2000.

ryucasta · February 28, 2002, 10:29 AM

While I find the 550 a good machine, having owned one before, I would suggest the 650 due to the auto indexing, and the case feeder. It's my opinion that you'll be better served by that machine vs. the 550. Even though it hasn’t been mentioned I don’t recommend the 1050 unless you’re going to be loading crimped military brass. This machine has the advantage of removing the crimp from the brass but unfortunately the standard lifetime Dillon warranty does not apply to it.

February 28, 2002, 10:29 AM	#18
ryucasta Senior Member Join Date: February 4, 2002 Location: Los Angeles, CA Posts: 431	While I find the 550 a good machine, having owned one before, I would suggest the 650 due to the auto indexing, and the case feeder. It's my opinion that you'll be better served by that machine vs. the 550. Even though it hasn’t been mentioned I don’t recommend the 1050 unless you’re going to be loading crimped military brass. This machine has the advantage of removing the crimp from the brass but unfortunately the standard lifetime Dillon warranty does not apply to it. __________________ Cheers, Raul Scarface/Tony Montana Says: Send me here. Send me there. This. That. Nothing you can do to me Harry, Castro didn’t do --- nothing...