View Single Post
Old September 9, 1999, 01:53 AM   #2
George Hill
Staff Alumnus
 
Join Date: October 14, 1998
Location: North Carolina
Posts: 11,546
This is an interesting case...

I would check the bullet size with a micrometer and also check your barrel to see if you have some fitting problems... Also check rounds and compaire the QC they have going...

If it recoiling noticable sharper than should be expected - it may be overheated and an unsafe load. Look at the firing pin marks on the primer... that will be an indicator, along with the ejection marks. Look for signs of overpressure. If there is not - This may be SMG fodder like you guessed. Got a Chrony? That would be interesting to measure... And I bet would work great out of a HK USP!

If its a well used gun - Is the barrel shot out? Maybe you have some serious fouling that you cant see when you just look down the tube... Not to question your hygene...

Is the gun shooting like this with only this perticular ammo?

------------------
"Supreme authority derives from a mandate from the masses. Not from some farsicle aquatic ceremony."

RAGE AGAINST THE MACHINE
The Critic formerly known as Kodiac




[This message has been edited by George Hill (edited September 09, 1999).]
George Hill is offline  
 
Page generated in 0.02342 seconds with 8 queries