The Firing Line Forums - View Single Post

cheygriz · December 5, 2002, 11:06 PM

A load that has worked well for me over the last 20+ years, and tens of thousands of rounds is as follows:

Cases: Milsurp-W-W
Primer: Remington 1 1/2 standard small pistol
Bullet: Remington 115 FMJ
Powder: HS-6 from Hodgdon.
Charge: 7.2 GR
OAL: 1.125
velocity: 1250 fps (average of chronographed velocity from several different guns, including Glock, Beretta, Sig, Walther, Luger.

All bullets are crimped with a Lee factory crimp die during loading
on a Dillon 650.
NOTE: THIS IS A=== +P=== LOAD, AND SHOULD BE WORKED UP TO IN YOUR GUN, SHOULD YOU CHOOSE TO USE IT!

It works for me.

December 5, 2002, 11:06 PM	#16
cheygriz Senior Member Join Date: May 11, 2002 Location: high up in the rockies Posts: 2,289	A load that has worked well for me over the last 20+ years, and tens of thousands of rounds is as follows: Cases: Milsurp-W-W Primer: Remington 1 1/2 standard small pistol Bullet: Remington 115 FMJ Powder: HS-6 from Hodgdon. Charge: 7.2 GR OAL: 1.125 velocity: 1250 fps (average of chronographed velocity from several different guns, including Glock, Beretta, Sig, Walther, Luger. All bullets are crimped with a Lee factory crimp die during loading on a Dillon 650. NOTE: THIS IS A=== +P=== LOAD, AND SHOULD BE WORKED UP TO IN YOUR GUN, SHOULD YOU CHOOSE TO USE IT! It works for me. __________________ If you think a mighty military force is expensive, wait 'til you see what a weak one costs.