View Single Post
Old March 26, 2002, 01:07 AM   #3
SHOCK
Member
 
Join Date: October 31, 2001
Location: Philippines
Posts: 19
no not limited-10 class. I think the standard class in IPSC is called limited class in USPSA.

This is the criteria:

Standard Division
Major power factor floor 170
Minor power factor floor 125
Minimum bullet weight No
Minimum bullet caliber 9 mm
Maximum pistol weight No
Minimum trigger pull No
Magazine length restrictions See Box
Magazine capacity restrictions No
50 mm from the body or torso Yes
Move ladies belt loops Yes
Compensators No
Ports No
Optics No
Fit in box Yes, with magazine inserted
.40 minimum caliber for major Yes
Specific holster position Yes
Modifications allowed Yes
Production guns only No


Minimum caliber for firearms is 9mm.
Minimum caliber for major power factor is 10 mm (.40 inches).
Any complete handgun or components produced by a factory and available to the general public.
Prototypes are specifically not allowed.
Changing caliber from the factory standard is specifically not allowed.
Electronic sights, or optical sights (one or more lenses with a diameter greater than 9.5mm), porting of barrels or compensators are specifically not allowed.
External modifications such as weights, or devices to control or reduce recoil are specifically not allowed.
External modifications which are specifically allowed:
Replacement of slides, provided the replacement slide profiles the factory standard.
Replacement of sights with metal sights.
Replacement of safeties. Ambidextrous safeties are approved.
Replacement beavertail grip safeties are approved.
Replacement of hammers.
Replacement of magazine release buttons.
Replacement of slide stops.
Enlargement of ejection ports.
Enlargement or replacement of magazine wells.
Checkering of frames.
Alteration of grip safety and grip tang.
Cosmetic enhancements that do not give a competitive advantage such as custom grips, plating, etc.
Internal modifications to improve accuracy, reliability, and function, are allowed, e.g. replacement barrels.
Any unloaded handgun in its ready condition with magazines inserted must fit within the confines of a box with the dimensions of 225 mm x 150 mm x 45 mm (tolerance of +1 mm, -0 mm).
The holster and allied equipment i.e., speed loaders and magazine pouches, must comply with existing rules and must be worn behind the anterior superior spina iliaca or the highest, most forward point on the pelvic girdle. The maximum inside distance of the handgun and equipment may not be more than 50 mm from the competitor's torso while standing relaxed. Range Master may use reasonable discretion.
__________________
Shoot now, Shoot later, Shoot again, and ask questions when everyone is dead.

Diligentia, Vis, Celaritas
Accuracy, Power, Speed
SHOCK is offline  
 
Page generated in 0.04282 seconds with 7 queries