View Single Post
Old September 29, 2013, 09:49 AM   #4
BillM
Senior Member
 
Join Date: January 20, 2009
Location: Amity Oregon
Posts: 376
Slug the bore and check the diameter of the chamber mouths before you get
too far into the reloading process.

38 S&W is a larger diameter than 38 LC, both in case diameter and
bullet diameter. If it's marked for both, the bore may be .360+, and
38 LC cases may bulge a bit when fired.
BillM is offline  
 
Page generated in 0.04247 seconds with 7 queries