View Single Post
Old July 11, 2013, 12:45 PM   #2
RickB
Senior Member
 
Join Date: March 1, 2000
Location: Western WA
Posts: 5,625
If you could make a barrel with an offset bore, so that the firing pin hits the rim rather than the center of the chambered cartridge, it might work. Which direction to offset is another issue. You have to be concerned with extractor location and tension, and feeding .22 from a .25 magazine. Very unlikely that a barrel change alone would do it.
RickB is online now  
 
Page generated in 0.04078 seconds with 7 queries