View Single Post
Old May 1, 2013, 02:39 AM   #17
eodinert
Member
 
Join Date: February 26, 2013
Posts: 44
KNS pins are a waste of money. Your problem would be solved by replacing the defective part in your rifle.

As mentioned above, there is a spring inside the hammer that retains the hammer pin. Most likely that spring is bad/broken/missing. Take the hammer and pin out of the rifle, and insert the pin in the hammer. You should feel it engage the pin as the pin slides through...and catch on the groove in the pin.
eodinert is offline  
 
Page generated in 0.05159 seconds with 7 queries