View Single Post
Old April 29, 2013, 07:04 PM   #12
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,464
The bolt is not dropping prematurely; it is supposed to drop into the leade, which is what it is doing.

Beagle and Fingers are correct. The spring is too strong and the bolt is probably sharp. Because the bolt has to be a spring (because of the way it interacts with the hammer cam), it is much harder than the cylinder of those guns. The bolt ball has to be reshaped and the bolt spring tension reduced.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04787 seconds with 7 queries