View Single Post
Old April 29, 2013, 06:57 PM   #6
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,841
It won't do it unless the bolt is fully closed, but I have a Remington 511 that will fire reliably if the bolt is closed hard. The firing pin does not protrude nor does it fall. The headspace is too tight and the rim is pinched between the bolt face and the face of the barrel. There is no discernible mark on the fired case. When the bolt is closed normally, there is no problem.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04571 seconds with 7 queries