View Single Post
Old March 28, 2013, 09:39 PM   #14
Mobuck
Senior Member
 
Join Date: February 2, 2010
Posts: 2,105
It is a "1916" Mauser. I've seen these with both 93 and 95 bolts. Another quirk noticed is that some of the actions had been cut back at the front ring. Apparently, this was done to facilitate rechambering/reboring the 7x57 to 7.62x51(.308). I've found a couple of these actions with this front ring cut back while others were not. I have one laying on the shelf that the customer brought in to be rebarrelled with a ready to install barrel. Unfortunately, the threaded barrel shank is about .1" longer than the threads inside the front action ring.
Mobuck is offline  
 
Page generated in 0.05252 seconds with 7 queries