View Single Post
Old March 27, 2013, 04:37 PM   #13
wild willy
Senior Member
 
Join Date: March 8, 2006
Posts: 201
If your bullets and case neck thickness are more than what the lee FCD is designed for it sizes the case when it goes in the die not after crimping.I have never had it do any thing with a jacketed bullet with lead it just bumps a little bit.One thing to watch for on the powder thru expander die some just barely fit in case and if the case isn't perfect in the shell holder it will ruin the case I just taper and polish the bottom 1/4 inch or so of the expander.And like others have said don't bottom out the sizing die.
wild willy is offline  
 
Page generated in 0.04591 seconds with 7 queries