View Single Post
Old March 18, 2013, 10:49 PM   #9
oldgunsmith
Senior Member
 
Join Date: January 9, 2013
Posts: 278
Have you tried tightening the screws, then opening the floorplate and feeling for any play at all in the box? I'd bet the farm it isn't magic. Something real is causing the problem. It wouldn't hurt to tighten the screws, then back them off about a half turn at a time and see how many turns it takes before paper will slip between the barrel and forend. The barrel should not be tight in the channel before the action is tight in the stock. Neither side should be tighter than the other.
oldgunsmith is offline  
 
Page generated in 0.06647 seconds with 7 queries