View Single Post
Old March 5, 2013, 06:38 PM   #7
rg1
Senior Member
 
Join Date: November 6, 2001
Posts: 758
It's going to really mess up your ultrasonic fluid. I use some odorless mineral spirits on a rag to cut the black sealant from the necks of the brass and also the tar left on the bullets. I wouldn't trust the old powder but if you think it's ok I wouldn't load them back to 49-50 grains but would cut back to 46.5-47 grains.
rg1 is offline  
 
Page generated in 0.05467 seconds with 7 queries