View Single Post
Old February 26, 2013, 11:39 PM   #2
CTS
Senior Member
 
Join Date: November 6, 2011
Location: NE Georgia
Posts: 1,070
I like the sounds of the 6x45. Basically take a 5.56x45 brass, run it through a .243 neck sizing die and load it with a 6mm/.243 bullet. It uses the same mag same bolt, same everything as a 5.56x45 except the barrel.
CTS is offline  
 
Page generated in 0.04996 seconds with 7 queries