View Single Post
Old February 26, 2013, 01:34 AM   #718
HUBEL458
Senior Member
 
Join Date: March 8, 2000
Posts: 575
First picture is of nice finished 87 Winchester Will Sanders got set up
and he is using short brass cases.Beautiful scroll work on the stock.



Next is takeoff of a slug idea from Longbow on Cast Boolits, 12ga lead
roundball with section of copper tube, with wads inside, bpgs seal on the
bottom, screwed together. I have many boxes of wads. Now he did his with
screw into ball, put tube on with screw centered inside tube and filled tube
with hot glue. It stays together. Both are nose heavy for smooth bore work.



Next is side sectioned view, one of our 585HE cases, showing how 3/4
ounce of shot fits in.. 585 is same bore as 24ga. Cards shown are 24ga.
Just glue top card in.Some of our 585s are smoothbore and the HB Minie
slugs work at short range and the shot will do at short range also going
over 2000 fps. Could use 24ga shotcup.



Next is a Mossy 390 with heavy 585 barrel. Makes a nice big bore gun,
and handles nice with texturized stock finish. About same strength as
the heavy break actions I have 585HE in.Ed


__________________
ED HUBEL
HUBEL458 is offline  
 
Page generated in 0.04421 seconds with 7 queries