View Single Post
Old February 24, 2013, 04:36 AM   #4
Orphanedcowboy
Senior Member
 
Join Date: April 16, 2009
Location: Fort Worth, Texas
Posts: 193
Remove the bolt stop, it is straight forward, hairpin clip inside loading port, put grease on the pin or a rag, it will go flying, push pin down and out, clean thoroughly, make sure both springs are good, re-assemble.
__________________
NRA Life Member
Orphanedcowboy is offline  
 
Page generated in 0.04274 seconds with 7 queries