View Single Post
Old February 21, 2013, 04:56 PM   #26
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 2,108
Bart, I have one tighter bushing, but not one looser. You may have a good point, because there is a very large difference in effort required to seat bullets in cases sized in the various dies. The NK die gave the most resistance, and the worst accuracy. The std FL die was next in resistance and had decent accuracy. The Lee had least resistance of all, but only slightly less than that of the Bushing Die. You could feel a difference between the two. After a couple hundred rounds reloaded and shot, I have developed quite a feel for comparative resistance in bullet seating. I need to place an order with Sinclair, and bushings are cheap. I'll get the looser one and see if it makes a diff.
603Country is offline  
 
Page generated in 0.05111 seconds with 7 queries