View Single Post
Old February 18, 2013, 09:34 PM   #6
nsfdave
Junior Member
 
Join Date: February 18, 2013
Posts: 1
I also have a 38 safety hammer. My issue is that when cocked in single action mode, when the slack is taken out of the trigger and u put pressure on the trigger to fire, it slips back into double action mode and the pressure of the hammer is put on the trigger instead of tripping the sear. I am assuming that this is not supposed to happen? I am thinking that the sear is being tripper prematurely before the double action notch has cleared the corresponding notch on the hammer and the hammer is catching on the notch for double action. Would this be correct?
nsfdave is offline  
 
Page generated in 0.04215 seconds with 7 queries