The Firing Line Forums - View Single Post - Pillar Bedding older Savage composite stocks

gmckinney626 · February 18, 2013, 09:04 PM

Here you go:

http://www.stockysstocks.com/servlet...-Pillar/Detail

I did a 110 with these, and the results are fantastic. The rear pillar has a cutout section so it fits properly to the action. Drill out the stock, install the pillars with a good epoxy like Devcon. I then bedded the action and recoil lug with gray Marine Tex. Rock solid bed.

February 18, 2013, 09:04 PM	#10
gmckinney626 Junior Member Join Date: June 29, 2012 Posts: 8	Here you go: http://www.stockysstocks.com/servlet...-Pillar/Detail I did a 110 with these, and the results are fantastic. The rear pillar has a cutout section so it fits properly to the action. Drill out the stock, install the pillars with a good epoxy like Devcon. I then bedded the action and recoil lug with gray Marine Tex. Rock solid bed.