Thread: Gunsmithing
View Single Post
Old February 13, 2013, 09:55 PM   #9
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,131
A good part of a polishing (smoothing) job, especially on an auto pistol, need not involve a wheel or Dremel at all. A little polishing compound on the slide rails and a few other points, with a bit of working the gun, will do wonders, with almost no chance of going too far and damaging something.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04659 seconds with 7 queries