View Single Post
Old February 13, 2013, 01:20 PM   #21
Join Date: March 4, 2005
Location: Ohio
Posts: 11,390
Yep. The brass spring-back from filling the chamber is uneven if the brass isn't dead perfectly symmetrical throughout (virtually never). So it's better to size enough to get clearance around the sides, and set the shoulder back just a thousandth or so to allow the taper of the shoulder to self-center the case neck in the chamber neck.
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Page generated in 0.04314 seconds with 7 queries