View Single Post
Old February 7, 2013, 12:37 AM   #3
alex0535
Senior Member
 
Join Date: November 4, 2012
Location: Georgia
Posts: 781
Have you checked out the recommended recipes on the Alliant Powder website?

http://www.alliantpowder.com/reloade...3&cartridge=26

I think it should be in the ballpark of 900fps. Starting 10% lower than your final desired load is always good practice. That would be 5.1grains and work up from there.
alex0535 is offline  
 
Page generated in 0.06167 seconds with 7 queries