Thread: Barrel threader
View Single Post
Old February 4, 2013, 08:12 PM   #2
Senior Member
Join Date: January 24, 2011
Location: Monroe,NC
Posts: 490
If you cant find a smith local any good machine shop should be able to do it. Get your break and take it with you. depending on the cal. it will be 1/2x28 or5/8 x 24 unless you have something larger than 30 cal.
The man that die's with the most stuff win's!
Roughedge is offline  
Page generated in 0.03310 seconds with 7 queries