Thread: M1 carbine help
View Single Post
Old February 3, 2013, 02:33 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
" I haven't ... messed with anything other than firing pin."

That is not true. You had to have "messed with" the extractor, which holds in both the firing pin and the ejector, and with the extractor spring and plunger. I suspect you have assembled the bolt so the extractor interferes with the ejector.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04190 seconds with 7 queries