View Single Post
Old January 30, 2013, 12:46 PM   #10
Wyoredman
Senior Member
 
Join Date: September 6, 2011
Location: Wyoming
Posts: 1,254
Matt,

A FL die still brings the brass into spec for any standard AR chambers. As snuffy said, unless you purchased brass fired from a machine gun, or your specific AR is very tight, the FL die will work fine. If you don't believe it, load some up with a FL die and try it. It will work.
__________________
Go Pokes!
Go Rams!
Wyoredman is offline  
 
Page generated in 0.04991 seconds with 7 queries