View Single Post
Old January 29, 2013, 04:49 PM   #8
Willie Sutton
Junior member
 
Join Date: January 26, 2012
Posts: 1,066
^^ What he said.

You do not remove the screw to break the frame away from the barrel, and you do not use the screw to attempt to set the depth the wedge goes into the mortise. The ONLY reason AFAIK for the screw is to prevent loss of the wedge when disassembling for routine cleaning.


Willie

.
Willie Sutton is offline  
 
Page generated in 0.04893 seconds with 7 queries