View Single Post
Old January 28, 2013, 09:14 PM   #9
Senior Member
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,461
There may be a more "proper" way but this is how I do it. Take the barreled action out of the stock, then get a dremel tool if you have one and evenly take material out of the barrel channel until you can easily slide a dollar bill all the way down the barrel without any resistance. Thats the easiest way. If you dont have a dremel tool you can get a wooden dowel rod and wrap sandpaper around it, but it takes longer
"Peace is that brief glorious moment in history when everybody stands around reloading"
steveNChunter is offline  
Page generated in 0.04063 seconds with 7 queries