View Single Post
Old January 22, 2013, 12:08 PM   #4
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,767
You can just go ahead and shoot it...but I wouldn't.

The stock touching the barrel- especially at the forend- means there's going to be a lack of consistency of pressure on the barrel.

I would remove the action, and re-set it in the AccuStock, torquing the action screws correctly (front screw first, after tapping the buttstock on the floor to properly seat it) to see if it solves the problem.

http://www.accurateshooter.com/techn...torque-tuning/
tobnpr is offline  
 
Page generated in 0.04635 seconds with 7 queries