View Single Post
Old January 12, 2013, 07:53 PM   #6
johno1
Junior Member
 
Join Date: September 19, 2007
Location: Taihape, N.Z.
Posts: 5
Done a bit more research and it actually looks good, at least 10% gain. Looking at over 200fps in this sized case. Simply running a 6mm PPC reamer into the exsisting chamber. Straightens the case out and gives a 30* neck.

I think the Lee collet die would work on the improved case, fire forming would not be a problem

Johno
johno1 is offline  
 
Page generated in 0.04961 seconds with 7 queries