The Firing Line Forums - View Single Post - Pre-measuring your loads. Bad idea?

hounddawg · December 16, 2012, 02:31 PM

James you don't have to use a .44 case to make your dipper. I use some 30.06 that some hunter was using to zero in his deer rifle to make mine for .308, .260, and .204 dippers. Just measure a load dump it in the rough dipper, mark it and cut it to length. For that matter a small piece of plumbing pipe with a cap on the end would work. Use some imagination and work with what you have

December 16, 2012, 02:31 PM	#46
hounddawg Senior Member Join Date: March 1, 2009 Posts: 760	James you don't have to use a .44 case to make your dipper. I use some 30.06 that some hunter was using to zero in his deer rifle to make mine for .308, .260, and .204 dippers. Just measure a load dump it in the rough dipper, mark it and cut it to length. For that matter a small piece of plumbing pipe with a cap on the end would work. Use some imagination and work with what you have __________________ Government is like a baby. An alimentary canal with a big appetite at one end and no sense of responsibility at the other. - Ronald Reagan