View Single Post
Old December 12, 2012, 11:48 AM   #16
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 9,991
Houndog,

I took a look at the CIP and SAAMI drawings and they differ a little from the drawing you found. The table below is in order of bullet diameter (except for the two different CIP and SAAMI numbers for the 9 mm Browning/.380; I did not try to go into the dozen different names for this cartridge—just those two):

Code:

9×18                9.02 mm (0.3552") CIP
9×21                9.03 mm (0.3555") CIP
9×22 MJR            9.03 mm (0.3555") CIP
9×25 Super Auto G   9.03 mm (0.3555") CIP
9 mm FAR            9.03 mm (0.3555") CIP
9 mm Luger          9.03 mm (0.3555") CIP & SAAMI
9 mm Steyr          9.03 mm (0.3555") CIP
9 mm Win. Mag.      9.03 mm (0.3555") SAAMI
9 mm Browning/.380  9.04 mm (0.3559") CIP — 9.055 mm (0.3565") SAAMI
9×23 Winchester     9.042 mm (0.3560") SAAMI
9 mm Browning long  9.09 mm (0.3579") CIP
9 mm Makarov        9.27 mm (0.3650") CIP & SAAMI

NOTE:  Unlike SAAMI, the CIP does not refer the the 9 mm Makarov (18.1 mm 
long case) as the same cartridge as their 9×18 (18.0 mm case).  That seems
to be a discrepancy in CIP and SAAMI terminology.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member

Last edited by Unclenick; December 12, 2012 at 12:02 PM. Reason: added clarification
Unclenick is offline  
 
Page generated in 0.04968 seconds with 7 queries