View Single Post
Old December 10, 2012, 02:41 PM   #2
schmellba99
Senior Member
 
Join Date: January 8, 2008
Posts: 601
Without my book in front of me, I can't remember what I'm loading my LRN to. I use Universal Clays, and something around 4.2 grains is what comes to mind with an OAL of 2.300" (but I could well be thinking of 9mm, so don't quote me on that)

If you are happy with your Berry's bullet load, start with 10 or 20 at .2 below, 10 or 20 at .1 below, 10 or 20 at .1 above and 10 or 20 at .2 above (assuming none of these are above or below min or max load specs for that powder) and see which work best in your gun.

In general (nothing is a hard an fast rule), what works with Berry's plated bullets works pretty much exactly the same with lead projectiles.
schmellba99 is offline  
 
Page generated in 0.05279 seconds with 7 queries