View Single Post
Old December 9, 2012, 09:39 AM   #8
Junior member
Join Date: September 27, 2011
Posts: 382
in my OPINION.., 98.5% of reloaders AR failure to lock up are due to the following photos, some are so slight it is unnoticeable, those are the ones that are most troublesome.

i use a Lee "factory crimp" die, it sometimes gets stuck and all the following loads will look like the case in the middle, if not unstuck.
BPowderkeg is offline  
Page generated in 0.03696 seconds with 7 queries