View Single Post
Old December 8, 2012, 02:49 PM   #2
Bill DeShivs
Senior Member
Join Date: April 7, 2006
Posts: 7,882
Is the barrel blued?
Removing bluing leaves the barrel susceptible to rust.
There is no need to use vinegar-just use wet/dry 600 grit sandpaper on the breech area. Then, 1000 grit, then higher grits. You can finish it with metal polish.
Bill DeShivs, Master Cutler
Bill DeShivs is offline  
Page generated in 0.07341 seconds with 7 queries