The Firing Line Forums - View Single Post

**hogdogs** · November 29, 2012, 06:09 PM

PASS FOR NOW!!! A 2 3/4 shell that is UNFIRED will fit as the length indicates FIRED and when fired, the hull will open into the forcing cone in front of the chamber and this reduces the required diameter thus pressure would spike in a short chamber.

Here is a "chamber gauge" this is all you need to measure...

http://www.csmcspecials.com/Handy_Mo...ge_p/t0321.htm

If you trust your own eyes and ability... it may serve your needs fine...

Brent

November 29, 2012, 06:09 PM	#7
hogdogs Staff Join Date: October 31, 2007 Location: Western Florida panhandle Posts: 10,689	PASS FOR NOW!!! A 2 3/4 shell that is UNFIRED will fit as the length indicates FIRED and when fired, the hull will open into the forcing cone in front of the chamber and this reduces the required diameter thus pressure would spike in a short chamber. Here is a "chamber gauge" this is all you need to measure... http://www.csmcspecials.com/Handy_Mo...ge_p/t0321.htm If you trust your own eyes and ability... it may serve your needs fine... Brent __________________ Finally have designs going up in the Hogdogs Outdoor Apparel online store. http://www.cafepress.com/hogdogsoutdoorapparel Thanks for lookin'...