Ok.. Here's a couple photos of what I have created. Theyre .44 Magnum Hornady XTP HP 300gr Projectiles with CCI #350 Magnum Primers and 9.5gr of Titegroup and Winchester WW Stamped Brass. Im seating to an OAL of 1.590 (Hornady Manual says 1.600 for Max OAL but I always go a bit under, a habit from loading for finicky semi autos) and im crimping to .455 with a very slight roll. The photos show what ive done, lemme know if more is needed or everything is in order to rock and roll!! Again, Thanx for the help.