The Firing Line Forums - View Single Post

fishbones182 · November 13, 2012, 08:48 PM

I use IMR4350 at 70 grains with standard large rifle primer and 150 grain soft points. Im up to 4 loadings on my brass with that load. I full length size them if not fired out of my gun then only neck size the brass and trim to length.

November 13, 2012, 08:48 PM	#11
fishbones182 Member Join Date: August 1, 2012 Location: Florida Posts: 98	I use IMR4350 at 70 grains with standard large rifle primer and 150 grain soft points. Im up to 4 loadings on my brass with that load. I full length size them if not fired out of my gun then only neck size the brass and trim to length.